[SFDXA] Tower Party in 2 weeks

[Pete Rimmel N8PR]

I'm Sure you all realize my "April Fool" error... April 18th not March 18th 
!!!  March 18th was a Wednesday  LOL

>
> I have the following volunteers for Saturday. March 18th  If you can make 
> it, please do...
>
> It is a week from Saturday... This week is the QCWA Lunch at noon at 
> Falcon Pub.  all are welcome.
>
> If your call is not here and you can make it, please let me know, we have 
> lots to do...
>
> AI4CJ
> K4LM
> KA2KON
> KE4PT
> KG4VPC
> KJ3Q
> KW4MG
> N4MEO
> N4TZH
> N4QV
> W1RG
> W9IL
>
> AND Maybe 2 more...
>
> Please bring a hat, bottle of water and gloves if you have them.
>
> See you at the Hamshack by the Pharmacy (5th Floor) at FMC on the 18th.
>
> Someone with steady hands please bring your glasses to solder an 8 pin 
> plug.  I will bring the solder and iron.
>
> 73,  PeteR  N8PR
>
>
> For all of you who have said you will help replace the tower at Florida 
> Medical Center for the South Florida DX AssociationPlease set aside 
> Saturday, April 18th - 9 AM for the Tower Party.
>
> We will need many hands to make light work of the project.
> We will be:Raising 3 sections of Rohn 25 to the roofraising the gin pole 
> and mast to the roof,Removing the TH-11 antenna, Taking down 4 sections of 
> Rohn 25, Putting up 3 sections of Rohn 25Replacing the Ham 4 Rotor with a 
> Tailtwister,
>
> Adding a longer mast.Soldering the rotor cable to a new, round connector 
> to plug into the T2XAll guy cables ( phillystran) are in good condition 
> and can be used as they are... just uncouple the tower ends and later 
> replace.
>
> We will have to adjust the turnbuckle ends as needed.
>
> PLEASE RSVP if you can make it.
>
> Thank You,
>
> Pete Rimmel N8PR
> ______________________________________________________________
> South Florida DX Assoc. "SINCE 1974"
> SFDXA WebSite: http://www.SFDXA.com
> SFDXA Repeater 147.33+ 103.5 Tone
> To Post: mailto:SFDXA at mailman.qth.net
> To UNSUBSCRIBE: http://mailman.qth.net/mailman/listinfo/sfdxa
> This list hosted by: http://www.qsl.net