[SFDXA] Stainless Steel Clamps

[LaVant Morell]

NIce.  The 1-5/8 is 2" ID.  the muffler clamps use pipe sizes and not 
tubing sizes.  As a rule of thumb on larger sizes like these you can add 
.375 or 3/8" to the pipe size to get tubing sizes.  The 1-5/8 is great 
for boom to mast clamps.

Vant


On 4/8/2014 9:25 AM, Bill wrote:
> Finding odd sizes of SS U-Bolts is always a challenge. Yes, some Ham 
> Suppliers have them but prices are often high. This was sent on 
> another list and there are other places found on Google searches, but 
> I thought it worth looking into. Too bad they don't have larger sizes.
> Bill W2CQ
>
> Stainless Steel Exhaust/Muffler Tube Clamps
>
> Stainless steel
> Ideal for any exhaust system
> Saddle-type clamp for added strength
> Thread size on clamps is 8mm-1.25
> Choose plain or polished
> Choose from 1-1/2", 1-5/8", 1-3/4", 1-7/8", 2", 2-1/8", 2-1/4", and 
> 2-1/2" pipe diameter
>
> http://www.speedwaymotors.com/Stainless-Steel-Exhaust-Muffler-Tube-Clamps,1699.html 
>
> ______________________________________________________________
> South Florida DX Assoc.
> SFDXA WebSite: http://www.SFDXA.com
> SFDXA Repeater 147.33+ 103.5 Tone
> To Post: mailto:SFDXA at mailman.qth.net
> To UNSUBSCRIBE or Subscribe:
> http://mailman.qth.net/mailman/listinfo/sfdxa
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>