[Scanner] Radio Shack scanners

[sbjohnston at aol.com]

 If online sources don't turn up something, you might try calling the RadioShack "National Parts" department at 
800-843-7422

They used to be very good about having service manuals available for their radio equipment.  They will probably want the catalog numbers of the scanners in question.     
PRO-2030 is 20-407 and PRO-2046 is 20-149 

I see on their legacy products pages they have posted the parts lists

http://support.radioshack.com/support_electronics/doc30/30416.htm

http://support.radioshack.com/support_electronics/doc36/36055.htm

and the service manual numbers are shown on those lists.

 


Steve 

sbjohnston at aol.com
http://www.wd8das.net/
--------------------------------------------------------------------
Radio is your best entertainment value.
--------------------------------------------------------------------




 

 

-----Original Message-----
From: Carl Morgan <k8cm at arrl.net>
To: radioshack <radioshack at mailman.qth.net>; scanner <scanner at mailman.qth.net>
Sent: Fri, Jul 8, 2011 5:36 am
Subject: [Scanner] Radio Shack scanners




Anyone have a schematic or, perhaps, alignment information for the 

Radio Shack PRO-2030 and/or PRO-2046 scanners?  I'm looking for a 

test point that will vary proportionally with input RF signal strength.



I've looked at mods.dk,  eBay, and Googled the world without success, 

now I'm hoping you might turn that around.



Any thoughts will be most appreciated.



Carl

______________________________________________________________

Scanner mailing list

Home: http://mailman.qth.net/mailman/listinfo/scanner

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:Scanner at mailman.qth.net



This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html