[ScanIndiana] Does anybody know how to
Terry Hoover
tghoover at iquest.net
Tue Feb 28 11:36:01 EST 2006
Just my luck I think I have a radio that those options are not selectable.
Isn't that special.
Thanks for the help any way hopefully this thread will help someone
-----Original Message-----
From: scanindiana-bounces+tghoover=iquest.net at mailman.qth.net
[mailto:scanindiana-bounces+tghoover=iquest.net at mailman.qth.net]On
Behalf Of Bill Powell
Sent: Tuesday, February 28, 2006 6:49 AM
To: scanindiana at mailman.qth.net
Cc: wb9omc at nlci.com
Subject: RE: [ScanIndiana] Does anybody know how to
In the book for my PR4700WX you scroll through the Mode Functions;
Set CTCSS Privacy Codes
Set DCS Privacy Codes
Set NOAA All Hazards Radio Channel
Set VoX On/Off
Set VoX Sensitivity Level
Set Memory Locations
Set Channel Scan
Set CTCSS Privacy Code Scan
Set DCS Privacy Code Scan
Set Memory Location Scan
Set VibrAlert and/or Call Alert
Set Call Alert Tone Signal
Set Roger Beep On/Off <= Here's the culprit
Set Keystroke Tones On/Off
When the Roger Beep is flashing, press the up or down channel button and the
On switches to Off and vice versa.
Hope this helps.
Bill
----Original Message Follows----
From: "Duane Mantick" <wb9omc at nlci.com>
Reply-To: Indiana Scanning <scanindiana at mailman.qth.net>
To: "'Indiana Scanning'" <scanindiana at mailman.qth.net>
Subject: RE: [ScanIndiana] Does anybody know how to
Date: Mon, 27 Feb 2006 20:13:44 -0500
Anybody who knows this information not only about this radio but
ANY FRS/GMRS please post it here. Those of us who use these
radios for tactical communications in Paintball and Lasertag
are getting sick of having our positions being given away by that
damnable noise (the roger beep). I can forward it on through
those forums as needed, but certainly valid information from
this group is a good place to start.
Thanks in advance
Duane
Lafayette, IN
-----Original Message-----
From: scanindiana-bounces+wb9omc=nlci.com at mailman.qth.net
[mailto:scanindiana-bounces+wb9omc=nlci.com at mailman.qth.net] On Behalf Of
Terry Hoover
Sent: Monday, February 27, 2006 6:57 PM
To: Indiana Scanning
Subject: RE: [ScanIndiana] Does anybody know how to
Does anybody know how to disable the Roger Beep on a Cobra Microtalk model
PR150-2 VP GMRS/FRS ? Cobra said they didn't know how to do it, I'm hoping
there's a hack out here that might help out a "Roger Beep" is a very
annoying beep each time you unkey the the PTT. any thoughts or experience
out there.
Thanks in advance
Terry
[mailto:scanindiana-bounces+tghoover=iquest.net at mailman.qth.net]On
____ ____ ___
/ __/______ ____ / _/__ ___/ (_)__ ____ ___ _ _\ \/ __/ _ `/ _ \_/
//
_ \/ _ / / _ `/ _ \/ _ `/
/___/\__/\_,_/_//_/___/_//_/\_,_/_/\_,_/_//_/\_,_/
______________________________________________
ScanIndiana mailing list
ScanIndiana at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/scanindiana
IndyScan.com 1996-2004
____ ____ ___
/ __/______ ____ / _/__ ___/ (_)__ ____ ___ _ _\ \/ __/ _ `/ _ \_/
//
_ \/ _ / / _ `/ _ \/ _ `/
/___/\__/\_,_/_//_/___/_//_/\_,_/_/\_,_/_//_/\_,_/
______________________________________________
ScanIndiana mailing list
ScanIndiana at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/scanindiana
IndyScan.com 1996-2004
____ ____ ___
/ __/______ ____ / _/__ ___/ (_)__ ____ ___ _
_\ \/ __/ _ `/ _ \_/ // _ \/ _ / / _ `/ _ \/ _ `/
/___/\__/\_,_/_//_/___/_//_/\_,_/_/\_,_/_//_/\_,_/
______________________________________________
ScanIndiana mailing list
ScanIndiana at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/scanindiana
IndyScan.com 1996-2004
____ ____ ___
/ __/______ ____ / _/__ ___/ (_)__ ____ ___ _
_\ \/ __/ _ `/ _ \_/ // _ \/ _ / / _ `/ _ \/ _ `/
/___/\__/\_,_/_//_/___/_//_/\_,_/_/\_,_/_//_/\_,_/
______________________________________________
ScanIndiana mailing list
ScanIndiana at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/scanindiana
IndyScan.com 1996-2004
More information about the ScanIndiana
mailing list