[ScanIndiana]FRS Info
Eric Sluder
ericsluder at insightbb.com
Tue Sep 7 00:18:05 EDT 2004
Ken,
You are correct, but the odds of transmitting at the same time and not being able to copy the other individual drop drastically with CTCSS/PL. Of course, selecting another channel is the best option, but not always available. Have you been to Dayton Hamvention before, if so you've experienced a disastrous display of co-channel interference, but ironically everyone seems to be able to communicate. Usually because of persistence, and folks run CTCSS decode so you don't have to listen to everyone else use the same frequency you are on. It's certainly not ideal, but gets the job done.
73, Eric
W9WLW
----- Original Message -----
From: Ken Bandy
To: 'Indiana Scanning'
Sent: Monday, September 06, 2004 8:32 PM
Subject: RE: [ScanIndiana]FRS Info
Just remember, the PL codes don't eliminate co-channel interference, they
just mask it. If Sam's Empire is using channel 1, PL code 3, and you're
using channel 1, PL code 20, you won't hear them, and they won't hear you,
but if you both try to talk at the same time, you'll still have problems.
Best bet is to go to another RF channel, then the PL won't matter.
Ken
KC9GLQ
-----Original Message-----
From: scanindiana-bounces at mailman.qth.net
[mailto:scanindiana-bounces at mailman.qth.net] On Behalf Of Eric Sluder
Sent: Monday, September 06, 2004 8:19 PM
To: Indiana Scanning
Subject: Re: [ScanIndiana]FRS Info
There's usually plenty of room still, just use CTCSS/PL codes and you should
be okay.
____ ____ ___
/ __/______ ____ / _/__ ___/ (_)__ ____ ___ _
_\ \/ __/ _ `/ _ \_/ // _ \/ _ / / _ `/ _ \/ _ `/
/___/\__/\_,_/_//_/___/_//_/\_,_/_/\_,_/_//_/\_,_/
______________________________________________
ScanIndiana mailing list
ScanIndiana at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/scanindiana
Visit Indiana's source for Scanner Information! http://www.indyscan.com
More information about the ScanIndiana
mailing list