[Scan-DC] Motorola Type 2 Questions

[along at comcast.net]

Gregory,

A few things to try:  Double check you've not accidentally programmed the
P16 system in.   Also, you should be able to manually click through the
control channels.  Listen to each of them to ensure you're receiving the
data on one, also double check to ensure that data channel is one from the
P25 Phase II system.  If all that checks out, try and reposition the antenna
and/or the scanner to see if reception changes/improves.  

Andy
KE8QHA

-----Original Message-----
From: scan-dc-bounces at mailman.qth.net <scan-dc-bounces at mailman.qth.net> On
Behalf Of Gregory Good
Sent: Wednesday, March 3, 2021 4:58 PM
To: scan-dc at mailman.qth.net
Subject: [Scan-DC] Motorola Type 2 Questions

Hello,

         I have both an SDS 100 and the BCD996P2, and I have programmed them
the same way however I cannot receive the Type 2 (Montgomery County
Police) on the BCD996P2. I have gone over the programming in Freescan and I
cannot find an issue. Can someone assist me with this? Please let me know.
Thank you for all of the assistance.

Sincerely,


Gregory Good
______________________________________________________________
Scan-DC mailing list
Home: http://mailman.qth.net/mailman/listinfo/scan-dc
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Scan-DC at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html