[Scan-DC] Feds admit radios interfere with garage door openers
WILSON HULLEY
starbird42393 at comcast.net
Wed Nov 20 17:45:36 EST 2019
GARAGE DOOR OPENERS CONTINUE TO BE AN ONGOING PROBLEM.........A REAL SHAME IN THE 21ST CENTURY...NO ONE SEEMS "TO GIVE A DAMN" ABOUT THIS CONTINUING ISSUE. THE OVERHEAD DOOR OPENER PEOPLE CONTINUE TO IGNORE REPEATED ATTEMPTS TO CORRECT THEIR ERRORS...A REAL SHAME...
W H HULLEY
CHEVY CHASE, MD
> On November 19, 2019 at 9:48 PM Mark Cobbeldick via Scan-DC <scan-dc at mailman.qth.net> wrote:
>
>
> I mostly encountered a 10 MHz offset for repeaters in the 378-400 band.
>
> HOWEVER..... In some areas, other offsets were used on a frequency by frequency basis. Usually when coordinating with Mexico and Canada. In those situations, at a single RF Site, some repeaters might be a standard 10 MHz offset, and other offset pairings might be what can be accommodated, and look bizarre to someone not familiar with the situation.
>
> BTW:
> Motorola has major headaches on the NCR system were all the frequency offsets at a single site were not the same exact offset.
> For some weird reason, Moto software (at that time) couldn’t accommodate different repeater offsets for the same site.
> All of them had to be 10 MHz, or 12 MHz, or whatever.
> Sites were Repeater 1 was 10 MHz offset, and Repeater 2 might be a 13.2 MHz offset was outside of their ability for several years.
>
>
> (I also ran into some wild repeater frequency pairings for repeaters on VHF-Highband on the State of Maine P-25 system, to de-conflict with Canada.)
>
>
>
>
> ===================================
> Mark Cobbeldick, KB4CVN
> Monroe, VA
> ===================================
>
> My goal in life is to be as good of a person my dog already thinks I am.
>
> -
>
> -----Original Message-----
> From: Bill Dunn [mailto:ecps92 at earthlink.net]
> Sent: Monday, November 18, 2019 12:32
> To: Robert Eisner; Mark Cobbeldick
> Cc: Scan-DC at mailman.qth.net
> Subject: Re: [Scan-DC] Feds admit radios interfere with garage door openers
>
> Generally by rule it is + 10 Mhz
>
>
> <snip>
>
> ______________________________________________________________
> Scan-DC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/scan-dc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Scan-DC at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the Scan-DC
mailing list