[Scan-DC] BCD 436HP forcing scan resume

[Joel Kahn]

Bob:
While I was programming/playing with the 436HP I was using a multiband antenna designed for a car, which works very well from on top of the bookcase in my office!

The little I did use the rubber duckie, it seemed to work just fine for me.
 
Joel R Kahn


________________________________
 From: Mary and Bob Jeter <904jeter at gmail.com>
To: Joel Kahn <jrkahn at att.net> 
Sent: Saturday, February 28, 2015 8:07 AM
Subject: Re: [Scan-DC] BCD 436HP forcing scan resume
 


Thanks again Joel,
I do have the easy read manual but must have overlooked the squelch
    resume. 
The manual(s) leave out info on quick keys i.e. how they are used in
    Profile and for each FL, but I figured that out. 396 manual was
    explicit.

The rubber duck is a handheld dummy load. I am using a cheap
    telescoping ant from junk box with much improved results.
I saw another comment about it some where.
What is your experience?
Thanks, Bob




On 2/26/2015 9:56 PM, Joel Kahn wrote:

No problem.  Did you check out www.marksscanners.com for the easier to read manual for the 436HP?  I just programmed one for a friend, and will need to get it back to re-do the favorites, systems and channels quick keys.  I set it up using the QK that his 396T uses but the 436 has so many more features that I will reprogram his favorites to make it easier for him to use.
> 
>Joel R Kahn
>
>
>
>________________________________
> From: Mary and Bob Jeter <904jeter at gmail.com>
>To: Joel Kahn <jrkahn at att.net> 
>Sent: Thursday, February 26, 2015 9:35 PM
>Subject: Re: [Scan-DC] BCD 436HP forcing scan resume
> 
>
>
>Wow!
>Thanks again Joel
>
>
>
>
>
>On 2/26/2015 8:48 PM, Joel Kahn wrote:
>
>click the selector knob (on top) to resume scanning. click clockwise to resume scanning or counter-clockwise to scan in reverse.
>> 
>>Joel R Kahn
>>
>>
>>
>>________________________________
>> From: Mary and Bob Jeter <904jeter at gmail.com>
>>To: Scan-DC at mailman.qth.net 
>>Sent: Thursday, February 26, 2015 8:37 PM
>>Subject: [Scan-DC] BCD 436HP forcing scan resume
>> 
>>
>>If stuck on a long winded transmission and
                              you want to resume scanning,
>>anyone know how to do it?
>>
>>With BCD 396 XT and BCD 996XT one simply
                              pushed the SCAN button to force 
>>scanning resumption
>>
>>This radio doesn't have a scan button
>>
>>Any comments about stock rubber duck
                              antenna?
>>______________________________________________________________
>>Scan-DC mailing list
>>Home: http://mailman.qth.net/mailman/listinfo/scan-dc
>>Help: http://mailman.qth.net/mmfaq.htm
>>Post: mailto:Scan-DC at mailman.qth.net
>>
>>This list hosted by: http://www.qsl.net
>>Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>>
>
>
>