[Scan-DC] Rebanding Montgomery County

[Dave]

  Well it is true that all frequencies will come down 15Mhz, as an 
earlier poster explained even if they don't change the present control 
channels, the other frequencies that have an 0 in the 4th place after 
the decimal point will require you to use the rebanding tables to hear 
all transmissions. Without the tables the Control Channel might look for 
one of those frequencies but the scanner itself will not be able to find 
them.

Dave M.




On 1/25/2012 11:56, Joel Kahn wrote:
> I don't know why only half of the address was copied correctly, but if you don't want to retype everything into your browser, what the document says is:
> all the frequencies will be lowered by 15MHz, which should put the main control channels (IF they use the sames control channels) at:
> primary     853.8625          Input at 823.8625  (45MHz lower)Alternate   853.6875Alternate   853.8875
> Alternate   853.9375
>
> Joel R Kahn
>
>
>
> jrkahn at att.net
> ______________________________________________________________
> Scan-DC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/scan-dc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Scan-DC at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>