[Scan-DC] Pro 106 and DC Fire

[Dewey]

I can't speak to the programming of the Pro-106 itself, but I can say a
little about DCFD / DCPD.  First, forget the fact that they are the same
system, as this is where most programmers get messed up.  While they are
both 603d, program the 460 system separate of the 800 system.  The 460
system is DCPD, and has a custom fleetmap, so don't forget about that when
you do your programming.  The DCFD and other DC Govt entities use the 800
side, and that can be programmed as a "standard" Moto 800 system.  If all
you want to monitor is FD, you do not need to enter any of the 460 stuff.

I hope that helps,
Dewey

-----Original Message-----
From: scan-dc-bounces at mailman.qth.net
[mailto:scan-dc-bounces at mailman.qth.net] On Behalf Of Barile, Philip
Sent: Monday, January 03, 2011 15:03
To: Scan DC
Subject: Re: [Scan-DC] Pro 106 and DC Fire

I have a new Pro 106 scanner and I have attempted to set up DC Fire both the
800 and the 460 MHz with all the frequencies and talkgroups associated with
Fire and no police talkgroups.  They are separated into 2 scan lists.  When
I turn on either or both lists I pick up nothing.  I know there are calls
being dispatched because in my conventional objects group I have the 154.190
frequency.  Can anyone provide some insight on the issue?  Has anyone else
has this same problem.

Thanks for any help anyone can give.

Philip Barile
IT Specialist - ISSO
(202) 254-4081 (Office)
(202) 528-8998 (Cell)
philip.barile at dhs.gov
______________________________________________________________
Scan-DC mailing list
Home: http://mailman.qth.net/mailman/listinfo/scan-dc
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Scan-DC at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html