[Scan-DC] Fairfax PD Mount Vernon

[Alan Henney]

I've noticed the anomaly too with patched talkgroups.

While the actual Motorola radios used by the public safety agencies
understand that talkgroup "A" is patched with talkgroup "B", apparently the
scanners only notice one of the pair.  And it varies depending upon which
talkgroup was patched first.

Isn't Mount Vernon typically patched with Franconia?  Try Franconia and see
if you hear Mount Vernon there.

Alan

----- Original Message ----- 
From: "Steve Thompson" <steve at n4tx.com>
To: <scan-dc at mailman.qth.net>
Sent: Tuesday, November 16, 2010 1:37 PM
Subject: [Scan-DC] Fairfax PD Mount Vernon


>I eventually noticed that I'm no longer hearing Fairfax County PDs Mount
> Vernon units up here in Tysons Corner.  They had been good copy and Radio
> Reference indicates no change in TGs.  My control channel freqs are set to
> the current ones in Radio Reference, but these folks seem to have dropped
> off the map.  I'm hearing everything else in the county just fine.
>
> Would appreciate any info.  Thanks.
>
> Steve, N4TX
>
>
> ______________________________________________________________
> Scan-DC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/scan-dc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Scan-DC at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html