[Scan-DC] DC 800/400 System

[W4NNG]

Had a similiar problem w/ my Pro-197.   Saw the PCC signal fine but never heard anything.

Thier 800 system consist of a multiple xmtr's at variouis locations.  Rig came to life when I set it to Roam and with a much lower then default roam threshold.   Here's the config that worked for me

Trunk Table = Default
MultiSite Mode = Roam
Threshold Hi = 95
Threshold Lo = 45
T Table = Default
Fleet Map = Type II

----- Original Message ----- 
From: Jerry Hoyt 
To: scan-dc at mailman.qth.net 
Sent: Sunday, January 18, 2009 10:55 PM
Subject: [Scan-DC] DC 800/400 System


I get the 460 MHz trunked channels just fine.but don't get any activity on the 800 MHz frequencies. I have them programmed in my Pro-96 the way they are set up from Radio Reference. the 4 control channels in the 800 Band, a blank, and then the control channels for the 460 Band. the police comes in fine.EMS/FIRE on the 800 frequencies. none. 

 

Anyone else had this problem?



--------------------------------------------------------------------------------


_______________________________________________
Scan-DC mailing list
Home: http://mailman.qth.net/mailman/listinfo/scan-dc
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:Scan-DC at mailman.qth.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/scan-dc/attachments/20090119/4f3a5a76/attachment.html