[Scan-DC] DC/Md metro milair activity

[ka3jjz at netscape.com]

I thought it might be interesting to show a list of what's been heard here in the DC metro area for milair activity over the last several weeks. Note that to fully use this list, your scanner must be capable of receiving 225-390 Mhz and 138-144 Mhz in the AM mode.  The RS PRO92, 93, 94, 95 and their mobile equivalents won't cut it here; The PRO96, 97. 2096, 2055 and PRO2052 will.  Uniden models such as the 780 and later will also handle these freqs.  Note that while the BC895 covers the 138-144 mhz band, you can't change the mode to AM.  The newer BC898 can. Of course, the AORs and Icoms can also deal with this.  
This list is presented in .csv format, which can be handeled by many of the better programming and control packages.

It can be found in the files area of the MD_Scan Yahoo group (called milairdc.txt), or in the messages of the Long Island Scanner Resource site, in both the Maryland (where it can be found in the 'General Maryland' thread) or in the DC forums (as a sticky message). You can get to the LISR boards from these links;

http://henney.com/chm/links/mddatah.htm#MLIST

http://henney.com/chm/links/dcdatah.htm#DCLIST

The data comes from several folks on the RadioReference Maryland board, under the sticky thread for milair. If you're interested, please c'mon over and join us.

73s Mike
 
links editor,Capitol Hill Monitors
Utility Monitoring Central
editor, Strong Signals software page
moderator, Long Island Scanning Resources DC board


_____________________________________________________________
Netscape. Just the Net You Need.