[Scan-DC] DOD's FED-SMR System

Sun, 23 Nov 2003 03:47:27 -0500

Whoops. Down arrow until you see TABLE , Enter, Scan. 

-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of John Vittone
Sent: Sunday, November 23, 2003 3:39 AM
To: [email protected]
Subject: RE: [Scan-DC] DOD's FED-SMR System

Yes
Bank: MOT
BASE: 406.20
Offset: 380
Step: 25

The kicker is CUSTOM TABLE must be enabled (due to 406.2 Base). In Win96
it's under MOT 3600 CC. To enable directly, PGM - TRUNK, FUNC - 3, down
arrow until you see CUSTOM. 

-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of Steve Thompson
Sent: Saturday, November 22, 2003 9:06 AM
To: [email protected]
Subject: [Scan-DC] DOD's FED-SMR System

I'd be interested in whether anyone has been able to receive the FED-SMR
System using a PRO-96.  I thought I got it loaded properly with Win96, but I
am getting nothing, although I am quite close to Tysons, one of the
transmitter locations listed on the Trunked Radio Database.  I get a few
talk groups, but they are silent, as if unmodulated.  If you're getting it,
what settings are you using for Base, Offset and Spacing?  Thanks.

Steve Thompson
N4TX

_______________________________________________
Scan-DC mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/scan-dc

_______________________________________________
Scan-DC mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/scan-dc