[SADXA] Two items for sale

[Bill Mullin]

Oops, the pictures did not stay attached to the post.  If anyone wants 
the pictures, send me an Email and I'll send the 2 pictures.

73


On 2019-06-28 13:57:21, Bill Mullin wrote:
> I've recently purchased a linear amplifier. Because of this, I have 
> the following items for sale . . .
>
> *_100' RG-8X_*.  Purchased from DX Engineering in November, 2018 for 
> $59, your price is only $40.
>
> *_MFJ-969 300 watt tuner_*.  Purchased from Purchased from DX 
> Engineering in October, 2018 for $245, your price is only $200.
>
> I know, you're saying MFJ = Mighty Fine Junk.  This is too often the 
> case but not so with this tuner!  Illuminated 30/300 watt meter, peak 
> or average output power, tuned or bypass, dummy load, coax or twin 
> lead, original box and original manual.  The only problem I had with 
> this tuner was the thumb indent on the roller inductor as shown in the 
> next picture from the MFJ online catalog:
>
>
> The control is a little too stiff to operate with a single finger, at 
> least it was form me.  So I looked around and purchased a "crank knob" 
> as shown in the following picture of the actual tuner which is for sale:
>
>
>
> This crank knob solved the problem and has made it easy to tune the 
> roller inductor!
>
> Call Bill, AA4M at 520 - five four six - three one zero zero or send 
> Email.
>
> 73, Bill
>
> ______________________________________________________________
> SADXA Website http://www.sadxa.org
>
> SADXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/sadxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:SADXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> You can support qsl.net: http://www.qsl.net/donate.html