[SADXA] Bird slugs

[WD7F - John]

I have a 500W one that the glue allowed the round name plate on the slug to
come loose easily. Under there was an adjustment.  So, K7IOU had a similar
one so we fired up his big AM transmitter and set mine to match his at about
350W.  Would have been nice to have a 500W source, but, oh well. Close
enough for AM work.
de WD7F John

-----Original Message-----
From: sadxa-bounces at mailman.qth.net [mailto:sadxa-bounces at mailman.qth.net]
On Behalf Of Lawrence Godek
Sent: Wednesday, January 03, 2018 1:06 PM
To: Southern AZ DX Association E-Mail Reflector
Subject: [SADXA] Bird slugs

Does anyone know who does Bird slug calibration, the factory folks or some
contract outfit?  Got a couple that appear to not be very "Bird" accurate.

Larry
W0OGH
______________________________________________________________
SADXA Website http://www.sadxa.org

SADXA mailing list
Home: http://mailman.qth.net/mailman/listinfo/sadxa
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:SADXA at mailman.qth.net

This list hosted by: http://www.qsl.net
You can support qsl.net: http://www.qsl.net/donate.html