[SADXA] MORE FOR SALES

[Tom Kramer]

Hi Tom:

Would you mind posting this list on your CADXA & SADXA reflectors.  If anyone is interested & will be attending the Prescott Hamfest June 10 & 11,  I can deliver items to them.
Tnx & vy 73,
Bob, K6PF

<snip>


Due to health concerns, I'm reluctantly offering for sale all my HV tube PAs for sale & biting the bullet to go to SS.  The following items are offered for sale:

1.  2m 8877 HPA.  W6PO design built by VE3KH.  Beautiful construction. Hv made many CW EME QSOs w/ this.  Up to 2KW Pout w/ 7-10 watts drive using the TE Systems 1410G driver listed below.  Just need a HVPS (see item 10 below).  Mounted on a 12.25" H rack panel.  $1,075.  See the following 3 items that were used w/ this PA.

2.  TE Systems 1410-G for 2m.  Xlnt condx.  10 W Pin / 100 W Pout.  Will drive above 8877 HPA to 2 KW Pout.  With built-in preamp.  Includes manual & schematic.  $225.

3.  Hi pwr LPF for 2m built by Geert, PA3CSG.  Used w/ 8877 HPA at full Pout.  $90.

4.  Spare 8877.  Medical pull tested new.  Hv test documentation.  $395.  Note used 8877s hv SOLD on eBay between $350 - $550 for an avg price of $437.

Note:  If items 1 thru 4 above are all purchased together, will work a discounted pkg price.

5.  AM-6154 converted to 2m using a 8930 tube.  Xlnt condx when last used many years ago.  400 watts Pout.  Includes TR relays & two zero centered meters to monitor control & screen grid currents.  Makes tuning up a lot easier.  Includes binder with extensive notes & schematics.  19" W (rack mounted) x 7" H xx19.75" D to back of TR relays.  $375.

6.  Brand new in the can 8930 tube for AM-6154.  $90.  Note two used tubes sold on eBay for $60.

7.  RF Concepts RFC 4-110 for 430-450 MHz.  Xlnt condx.  10W Pin / 100W Pout.  With built-in preamp.  Includes manual & schematics.  $200.

8.  SSB LT23S xvtr.  Just got bk fm being chk'd out at SSB-USA.  1296-1298 MHz w/ 144-146 MHz IF.  SSB measured NF at 1.65dB & gain of 21.8dB with 9.1 watts Pout.  Xlnt condx.  Hv schematics & manuals in English & German.  Paid $650, sell for $375.

9.  New 23cm PA & PS built by K6KWQ using water cooled GS-15B in cavity built by KD5FZX.  Pout at 1296 MHz s/b 350-400 watts.  Free-standing or rack mount.  19" W x 7" H x 17" D. Never used.  Includes all pwr supplies & variac.  Also includes three extra GS-15Bs with water jackets, water pump & heat exchanger & uA meter for measuring current in water supply.  220 VAC pwr.  $1,250.

10.  HVPS & control box.  4KV at 1 A.  Will pwr either 8877 or 8938 to 2 KW Pout.  Hvy duty Peter Dahl xfmr, HV diode bridge & filter caps w/ fan.  Free-standing in anodized cabinet w/ beautiful construction.  Control box includes time delay ckts (currently not working), hvy duty blower, sequencer,  variac for tube filaments, four meters to read plate & grid current & filament & plate voltages.  Includes all interconnecting cables.  Pick up only.  Too heavy to ship.  $1,300.

11.  GlenMartin RT-936 roof mounted 9 ft tower with thrust bearing (TB), roof mounting brackets & manual. All in like-new condx. HRO selling these for $1,000 + cost of TB & mounting brackets. $395.

12.  KLM 432-30LBX yagi. 30 elements on 432 MHz, 17.3dBd gain, almost 22 ft boom, 3 driven elements (log periodic style) & copy of manual. Used for many years & works vy well. Reduced to $75.

13.  Cushcraft Model 424B Yagi for 432 MHz with 24 elements including triangular reflector for 432 MHz. Gain spec'd at 18.2dBd (seems hi) & boom is 17.4 ft. Acquired fm a friend in So Calif & never used it myself. Copy of manual included. In very gud condx. Reduced to $75.

14.  Datum Programmable Time System / Time Code Generator. Model 9700AT. I never used it. Powers up & completes self-check. Includes manual. Can utililize internal oscillator or I planned on using it as a time readout (IRIG) for my Odetics GPS rcvr but then I found a different one. Rack mounted 1.75" H x 19" W x 19" D. Reduced to $75.

All other items previously advertised hv bn sold.  All prices are OBO + packing materials (unless I hv on hand), shipping & insurance. Prefer local pickup in Chino Valley, AZ. Will deliver to Prescott, AZ Hamfest June 10 & 11 if pre-paid.  Pictures of every item are available on request. PayPal accepted.

Tnx for reading & vy 73,

Bob, K6PF

Chino Valley, AZ 86323