[SADXA] 100 CFM Blower Needed

[JERRY]

Well as it works out the fan I have is a Dayton 4C440 and  the specs say 
it is only a 50 CFM fan so it guess it will not meet your requirement.

Oh well

On 5/26/2012 5:48 AM, JERRY wrote:
> Dick:
>
> I have a fan that I took off my 6m amp and replaced with a 220 AC job.
> First I have to find it, in this mess, and then I have to determine the
> volume of air it moves. I am going to be gone most of today but when I
> get back I will try locate it and see what it does. To give you an idea
> the amp uses two 3CX800A7s which it was used on. Should probably be enough.
>
> Jerry
>
> On 5/25/2012 9:52 PM, Richard Solomon wrote:
>> I have a Henry Tempo 6N2 Amp I am bringing back to life.
>> The original blower (which was inadequate to say the least),
>> has been removed.
>>
>> I need a 100 CFM Blower, 115 vac would be best.
>>
>> Anyone have one ?
>>
>> Tnx, 73, Dick, W1KSZ
>> ______________________________________________________________
>> SADXA Website http://www.sadxa.org
>>
>> SADXA mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/sadxa
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:SADXA at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> You can support qsl.net: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> SADXA Website http://www.sadxa.org
>
> SADXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/sadxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:SADXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> You can support qsl.net: http://www.qsl.net/donate.html
>