[SADXA] Looking for adapter

[Ron Cade]

Hi Keith,

I had to make one of those myself several year ago so that I could use my MC60 microphone with the IC706.
I soldered a 12 inch piece of CAT cable with the RJ45 connector already attached to a 8 pin male mic connector and put it in a small black hobby box.

Good luck with your project.
Ron
  ----- Original Message ----- 
  From: Keith KR7RK<mailto:keith at kr7rk.com> 
  To: 'Southern AZ DX Association E-Mail Reflector'<mailto:sadxa at mailman.qth.net> 
  Sent: Monday, May 02, 2011 9:06 PM
  Subject: [SADXA] Looking for adapter


  I'm in need of an adapter:

  8-pin male modular (RJ45) to 8-pin round female for a mic input.

  Anybody have one or know where I can get one?

  Otherwise I'll need to find some parts and fire up the old soldering iron.

  Thanks,

  Keith KR7RK

   

   

  ----------------------------------------------------

  73 de KR7RK

  keith at kr7rk.com<mailto:keith at kr7rk.com>

  Website/Blog at http://www.kr7rk.com<http://www.kr7rk.com/>

  ----------------------------------------------------

   

  ______________________________________________________________
  SADXA Website http://www.sadxa.org<http://www.sadxa.org/>

  SADXA mailing list
  Home: http://mailman.qth.net/mailman/listinfo/sadxa<http://mailman.qth.net/mailman/listinfo/sadxa>
  Help: http://mailman.qth.net/mmfaq.htm<http://mailman.qth.net/mmfaq.htm>
  Post: mailto:SADXA at mailman.qth.net<mailto:SADXA at mailman.qth.net>

  This list hosted by: http://www.qsl.net<http://www.qsl.net/>
  You can support qsl.net: http://www.qsl.net/donate.html<http://www.qsl.net/donate.html>