[SADXA] Looking for adapter

[w7lb]

Keith,

You will have to be careful since each radio manufacturer has their own spec
on the round mic connectors and probably the RJ-45 connectors as well.  This
adapter will probably need to be specific to your mic connector on each end,
so check out the pin-outs carefully.   Right off hand I can't think of a
good source, but there has to be one somewhere.

Larry, W7LB

-----Original Message-----
From: sadxa-bounces at mailman.qth.net [mailto:sadxa-bounces at mailman.qth.net]
On Behalf Of Keith KR7RK
Sent: Monday, May 02, 2011 9:06 PM
To: 'Southern AZ DX Association E-Mail Reflector'
Subject: [SADXA] Looking for adapter

I'm in need of an adapter:

8-pin male modular (RJ45) to 8-pin round female for a mic input.

Anybody have one or know where I can get one?

Otherwise I'll need to find some parts and fire up the old soldering iron.

Thanks,

Keith KR7RK

 

 

----------------------------------------------------

73 de KR7RK

keith at kr7rk.com

Website/Blog at http://www.kr7rk.com

----------------------------------------------------

 

______________________________________________________________
SADXA Website http://www.sadxa.org

SADXA mailing list
Home: http://mailman.qth.net/mailman/listinfo/sadxa
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:SADXA at mailman.qth.net

This list hosted by: http://www.qsl.net
You can support qsl.net: http://www.qsl.net/donate.html


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1325 / Virus Database: 1500/3611 - Release Date: 05/02/11

-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1325 / Virus Database: 1500/3611 - Release Date: 05/02/11