[SADXA] Stress Analysis Doucument for Wilson TT-45

[Jim Henderson]

Doug, you might ask on the TOWERTALK reflector. Wilson has been out of Biz
for a long time, but someone might have one archived.

   Back when Wilson was in Biz, the local codes and the main document upon
which they were based (EIA-222 revision ??) were not so carefully
scrutinized by local authorities.

  These days everyone is wanting ratings for 90 MPH, not the older 70 and 50
MPH.

  The US Tower MA-40 is very similar, but I do not know if it it 'exactly'
the same for the purposes of calculating for the codes people.

  I have not delt with this in 2 years, but back then I had to meet the
newest EIA 222 and Uniform Building Code 2000 requirements.

  And this is funny, because about 6 years ago, I wrote the ordinance for my
municipality (Queen Creek)!

  Good luck.

Jim, KF7E




----- Original Message ----- 
From: "Douglas Todd" <toddd1 at cox.net>
To: "Southern AZ DX Association E-Mail Reflector" <sadxa at mailman.qth.net>
Sent: Monday, July 12, 2010 4:32 AM
Subject: [SADXA] Stress Analysis Doucument for Wilson TT-45


> Does anyone have a copy of a stress analysis document for the Wilson TT-45 
> tower. If so, I can get it certified here in AZ, but I need a copy from 
> the manufacturer.
>
> Please let me know.
>
> Doug
> ______________________________________________________________
> SADXA Website http://www.sadxa.org
>
> SADXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/sadxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:SADXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> You can support qsl.net: http://www.qsl.net/donate.html
>
> -- 
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.