[Racal] Help on Racal filters

[Dan Rae]

"Howard L Ritter, Jr" wrote:

> Well, fools rush in and all that....

Don't panic Howard.  As it says in the manual, the filter in the FL1 slot (the
slot closest to the rear of the radio)  should either be the LSB filter, if you
have both or the 3.2 sym job, I suspect,  in your case.  The others do not
matter, BITE will sort it out.

Run BITE again and all should be copacetic.  The bite derived values may not
totally agree with the marked values on thr filters, but it doesn't matter. For
the widest B/W the BITE will measure the roofing filter probably if you have one
of the filter slots shorted out.

The CPU will arrange them in order for you....
Good luck,
Dan
AC6AO G3NCR