[R-390] R-390A help needed

[Karsten Simon]

> Try swapping the receiver connections at the switch and check again
That was the first thing I had done of course

-----Ursprüngliche Nachricht-----
Von: r-390-bounces at mailman.qth.net [mailto:r-390-bounces at mailman.qth.net] Im Auftrag von William Blodgett via R-390
Gesendet: Freitag, 7. Februar 2025 23:34
An: R-390 at mailman.qth.net
Betreff: Re: [R-390] R-390A help needed

First, verify the route through the switch is “equal” to both receivers.  Try swapping the receiver connections at the switch and check again

P.S.- Both are great radios !

73,
Bill
AI5RP 
++++++++++++++++
Bill Blodgett
Arlington, Texas
USA

> On Feb 7, 2025, at 12:22 PM, Karsten Simon via R-390 <r-390 at mailman.qth.net> wrote:
> 
> 
>> 
>> are you using the same antenna for both radios?
> 
> Yes. Both are connected to the antenna selector switch via a two port -3db
> splitter.
> 
> ______________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-390 at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:R-390 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html