[R-390] Update on R390A, open question regarding scope and options fir lubrication

[Joseph Koester]

Would it be better to take long running discussions off line?

-----Original Message-----
From: r-390-bounces at mailman.qth.net <r-390-bounces at mailman.qth.net> On
Behalf Of Jordan Arndt
Sent: Friday, June 28, 2024 3:23 PM
To: Barry <n4buq at knology.net>; Jacques Fortin <jacques.f at videotron.ca>
Cc: R-390 Mailing List <r-390 at mailman.qth.net>
Subject: Re: [R-390] Update on R390A, open question regarding scope and
options fir lubrication

It appears that C327 and C328 have been cross labelled in the Y2K manual...

73...Jordan VE6ZT


----- Original Message -----
From: "Barry" <n4buq at knology.net>
To: "Jacques Fortin" <jacques.f at videotron.ca>
Cc: "jkharvie" <jkharvie at verizon.net>; "Jim Whartenby" <old_radio at aol.com>;
"R-390 Mailing List" <r-390 at mailman.qth.net>; "Les Locklear" 
<leslocklear at hotmail.com>; "Jordan Arndt" <outposter30 at shaw.ca>
Sent: Friday, June 28, 2024 2:07 PM
Subject: Re: [R-390] Update on R390A, open question regarding scope and
options fir lubrication


>I just opened the Y2K-R3 document and on page 6-47,  Figure 6-21 shows 
>a picture of C327 which appears to be a ceramic disc.  Is that a 
>mistake in the Y2K documentation?  Apologies if this has already been 
>discussed but I found it odd in light of all this recent conversation
regarding C327.
>
> Thanks,
> Barry - N4BUQ

______________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:R-390 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html