[R-390] The role (if any) of modern resistors within a R390A receiver

[Jacques Fortin]

John, for me this is not an issue, whatever the location they are used in a R-390A.

73, Jacques, VE2JFE in Montreal

-----Message d'origine-----
De : r-390-bounces at mailman.qth.net <r-390-bounces at mailman.qth.net> De la part de jkharvie via R-390
Envoyé : 8 juillet 2024 21:30
À : R-390 Mailing List <r-390 at mailman.qth.net>
Objet : [R-390] The role (if any) of modern resistors within a R390A receiver

I have a confession to make.  

My collection of 200 or so composition carbon resistors that I put together in 1989 for servicing rebuild of receivers is now showing the majority of the resistors have drifted out of 10% tolerance and are not usable.
27 ohm is now 38 ohm
22K is now 32K
etc...
After some review I purchased  a new collection of ~75 values, 5 resistors each.
These are lovely 1 Watt carbon film resistors, good copper leads well tinned, non magnetic per the advertisement.  Look great!

Dimensions:Body is 0.440" long, diameter of 0.157" 
Leads are 0.026", 0.990" longEnd cups on resistor body are 0.165" diameter, ~0.090" wide 

I thought I was out of the woods....
Issue/ question:The manufacturing of these resistors involves use of two "end" caps on the ceramic tube for the transition to the copper wire leads.
I have discovered that these two end caps are made of an alloy that is able to be easily picked up by a magnet.
I am thinking unintentional addition of magnetic reactance to areas of the receiver.

How big an issue is this going to be on the receiver?
1) Not an issue, go ahead and use without concern
2) Return these for a refund
3) OK to use in all areas except for the following areas.

Better options?
thank you

John (N3JKE)
______________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:R-390 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html