[R-390] Name Plate Screw Size?

[Barry]

Unfortunately, I don't have an ARC-5. I'll have to keep looking. Not a big deal, but would like to plug that hole. 

Thanks, 
Barry - N4BUQ 

> From: "Renee K6FSB" <k6fsb.1 at gmail.com>
> To: "n4buq" <n4buq at knology.net>, "thoyer" <thoyer1 at verizon.net>
> Cc: "R-390 Mailing List" <r-390 at mailman.qth.net>
> Sent: Sunday, October 2, 2022 9:50:51 PM
> Subject: Re: [R-390] Name Plate Screw Size?

> #3 you mean a 3-48? those were on the ARC-5 stuff IIRC
> Renée

> On 10/2/22 4:13 PM, Barry wrote:

>> I figured #3s were an odd size.  Likely someone modified the panel and I think
>> finding another #3 screw won't be easy.

>> Thanks,
>> Barry - N4BUQ

>> ----- Original Message -----

>>> From: "thoyer" [ mailto:thoyer1 at verizon.net | <thoyer1 at verizon.net> ] To:
>>> "n4buq" [ mailto:n4buq at knology.net | <n4buq at knology.net> ] , "R-390 Mailing
>>> List" [ mailto:r-390 at mailman.qth.net | <r-390 at mailman.qth.net> ] Sent: Sunday,
>>> October 2, 2022 6:03:52 PM
>>> Subject: RE: [R-390] Name Plate Screw Size?

>>> The screws on both of my R390's are 2-56.

>>> Tom
>>> W3TA

>>> -----Original Message-----
>>> From: [ mailto:r-390-bounces at mailman.qth.net | r-390-bounces at mailman.qth.net ] [
>>> [ mailto:r-390-bounces at mailman.qth.net | mailto:r-390-bounces at mailman.qth.net ]
>>> ]
>>> On Behalf Of Barry
>>> Sent: Sunday, October 02, 2022 4:21 PM
>>> To: R-390 Mailing List
>>> Subject: [R-390] Name Plate Screw Size?

>>> I have an R390 that's missing one of the screws that holds the nameplate to
>>> the front panel.  I'm pretty sure the size for the R390A is #2-56; however,
>>> this is an R390 and appears to have #3 screws (measures about 0.097"
>>> diameter).  Does anyone know whether the R390 used #3 sizes for the
>>> nameplate or, possibly, has someone tapped the holes just a bit larger in my
>>> front panel to accommodate #3 screws?

>>> In any case, I suppose I'm going to need a #3 to fill that hole.  Not sure
>>> if the local store where I've bought lots of small stainless-steel pan-head
>>> machine screws will have #3 but I can check.

>>> Thanks,
>>> Barry - N4BUQ
>>> ______________________________________________________________
>>> R-390 mailing list
>>> Home: [ http://mailman.qth.net/mailman/listinfo/r-390 |
>>> http://mailman.qth.net/mailman/listinfo/r-390 ] Help: [
>>> http://mailman.qth.net/mmfaq.htm | http://mailman.qth.net/mmfaq.htm ] Post: [
>>> mailto:R-390 at mailman.qth.net | mailto:R-390 at mailman.qth.net ] This list hosted
>>> by: [ http://www.qsl.net/ | http://www.qsl.net ] Please help support this email
>>> list: [ http://www.qsl.net/donate.html | http://www.qsl.net/donate.html ]

>> ______________________________________________________________
>> R-390 mailing list
>> Home: [ http://mailman.qth.net/mailman/listinfo/r-390 |
>> http://mailman.qth.net/mailman/listinfo/r-390 ] Help: [
>> http://mailman.qth.net/mmfaq.htm | http://mailman.qth.net/mmfaq.htm ] Post: [
>> mailto:R-390 at mailman.qth.net | mailto:R-390 at mailman.qth.net ] This list hosted
>> by: [ http://www.qsl.net/ | http://www.qsl.net ] Please help support this email
>> list: [ http://www.qsl.net/donate.html | http://www.qsl.net/donate.html ]