[R-390] bracket

[Barry]

I prefer my XCELITE 99-66.  The extra long blade is very handy (although it may not be as easily stored on the back of an R390 as the original).

Thanks,
Barry - N4BUQ

----- Original Message -----
> From: "gary biasini" <gary.biasini at shaw.ca>
> To: n4buq at knology.net
> Cc: "Collins R-390 HF Receiver List" <r-390 at mailman.qth.net>
> Sent: Monday, July 12, 2021 10:03:34 AM
> Subject: Re: [R-390] bracket
> 
> Kevin and all,
> 
> I believe that the screwdriver is a Vaco (now Klein Tools) P18.  I ordered
> several a few months ago and they are identical to the original screwdriver
> that I was fortunate enough to get with one radio except that the handle on
> the new one is stamped with "Vaco P18 U.S.A." whereas the original is
> stamped with "Vaco P18" on one side and "Collins Co." on the other side.
> Here is the link to the same place that I purchased the P18:
> 
> https://www.amazon.com/Profilated-Screwdriver-Klein-Tools-P18/dp/B0000BYEPU/
> ref=sr_1_1?dchild=1&keywords=klein+tools+p18&qid=1626101782&sr=8-1
> 
> As for the spline wrench, I agree with Larry's comments.  If I had any
> machining skills, I would take the one you can buy now, either straighten
> into a straight shaft or cut off at the bend and fashion as handle like the
> original.
> 
> Good luck!
> 
> Gary
> 
> -----Original Message-----
> From: r-390-bounces at mailman.qth.net <r-390-bounces at mailman.qth.net> On
> Behalf Of Larry H
> Sent: July 12, 2021 4:27 AM
> To: Gary Biasini <gary.biasini at shaw.ca>
> Cc: Collins R-390 HF Receiver List <r-390 at mailman.qth.net>
> Subject: Re: [R-390] bracket
> 
> My apologies, I am wrong about the phillips screwdriver size.  It's a #2,
> not 1.  I know why I went down that path - I tried many #2 phillips on the
> left rear RF deck green hold down screw, and the shafts were all too big in
> diameter.  The maximum shaft diameter that will work is 5/32".  I couldn't
> find a #2 with a 6" long by 5/32" diameter shaft, so got a #1 and very
> carefully use it.
> 
> Also, the Bristol spline wrench is specified as 7 3/4" long in the parts
> list.  Although the 3 1/4" one I use works fine, the longer one would be
> easier to use in some cases.
> 
> Sorry for the confusion.
> 
> Regards, Larry
> 
> On Sun, Jul 11, 2021 at 7:46 PM Larry H <larry41gm at gmail.com> wrote:
> 
> > Hi Kevin,   The Phillips head screwdriver is a #1 and 6" long shaft.    I
> > got a nice one at Lowe's for a reasonable price.  Don't settle for a
> > cheaply made one..
> >
> > The spline wrench is a .096 inch diameter, 6 spline by 3 inches long,
> > L shaped.  Kits are easy to find with it in there, but you can also
> > find them individually.
> >
> > The mounting bracket on the back of the rx is not usually found
> > separately.  They are a part of the back panel.
> >
> > Regards, Larry
> >
> > On Sun, Jul 11, 2021 at 1:39 PM Kevin Page <kf4znl at live.com> wrote:
> >
> >> Looking for the fluted socket wrench, screwdriver and mount that
> >> holds them to the panel of my 390a receiver. Thanks for any guidance
> >>
> >> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for
> >> Windows 10
> >>
> >> ______________________________________________________________
> >> R-390 mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/r-390
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:R-390 at mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net Please help support this
> >> email list: http://www.qsl.net/donate.html
> >>
> >
> ______________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-390 at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-390 at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>