[R-390] Amelco R390A help, RT301 current regulator tube

[B Riches]

 There are  Twinax to C and BNC adapters on Ebay and from other connector suppliers - Try Pasternak.
73,
Bill, WA2DVUCape May, NJ 
    On Sunday, December 26, 2021, 09:33:09 PM EST, Larry H <larry41gm at gmail.com> wrote:  
 
 Sam, Replacing the rf connectors is not a good idea.  They are built
into the antenna relay in such a way that it would be very difficult to
maintain the relay operation.  See my antenna relay doc in the tutorials
section on our website, r-390a.net.  There are twinax and C
connectors available, but I don't know about in Rio.  I can help you with a
twinax connector, if necessary.

Happy New Year.

Regards, Larry

On Sun, Dec 26, 2021 at 10:50 AM Studiumtelecom S.Rocha <
battcharger at gmail.com> wrote:

> Thanks to all ! I used method number 4, with a solid jumper and a pair of
> 12BA6, I found a regulator tube for usd$28.00 here in Rio, so I think it
> worths buying it also in the future.
>
> The interesting point is that I have all spares tubes for this radio,
> except the only which was defective!
>
> Another question: should I replace the antenna connector for a SO-239 UHF
> type?
> Regards and a Happy New Year to all!
> Sam Rocha
>
>
______________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:R-390 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html