[R-390] Collins hardware request

[Gary I. Biasini]

Don,

These might work for you.

Might be perfect fit

https://www.mcmaster.com/self-tapping-screws/screw-size~no-6/drive-style~phillips/tip-type~blunt/length~1-4/tapping-method~thread-forming/

Perhaps wrong colour:

https://www.ebay.com/itm/Tapping-Screws-6-x-1-4-Slotted-Pan-Head-Type-B-Steel-Yellow-Lot-of-50-4970/252393100893?hash=item3ac3cd165d:g:YaQAAOSw41xXOzU7

May not be self-tapping

https://www.ebay.com/itm/6-32-X-1-4-SCREW-PAN-HEAD-PHILLIPS-ZINC-STEEL-100-pcs/380734676381?hash=item58a58e1d9d:g:1DUAAOxyXp5STGwQ

1/16" short

https://www.ebay.com/itm/50-pcs-6-32-x-3-16-Philips-Head-Screw/293662280155?hash=item445fa2c9db:g:y3MAAOSwCAVa2LMb

Look good but description says "Yellow Zinc Plated"

https://www.ebay.com/i/352470165060?chn=ps

May not be self-tapping

https://www.ebay.com/i/330789881761?chn=ps

Type F not B

Good luck!


-----Original Message-----
From: r-390-bounces at mailman.qth.net [mailto:r-390-bounces at mailman.qth.net] On Behalf Of wc4g at knology.net
Sent: September 2, 2020 8:55 AM
To: Gary Biasini <gary.biasini at shaw.ca>
Cc: Collins R-390 HF Receiver List <r-390 at mailman.qth.net>
Subject: [R-390] Collins hardware request

I have attached a picture of what I need. I know some of you have parted out a 30S-1 and it was full of these type screws. They are a #6 X 1/4 type B panhead sheet metal screw. I hope that you saved this hardware and are willing to help me out.
I know I can find them online but I don't need 10,000, just a few.
Thanks for looking
Regards,
Don WC4G
Charleston, SC