[R-390] (no subject)

[Larry H]

Hi Gary,  Sorry to disappoint, but the connectors you are referring to have
a male pin as the connector for the center conductor.  The ones used in the
R-390A have a female connector for the center wire.

Regards, Larry

On Thu, Sep 19, 2019 at 11:24 PM Gary I. Biasini <gary.biasini at shaw.ca>
wrote:

> Richard,
>
> My apologies for getting late to the party.
>
> Check out this URL:
>
> https://www.amphenolrf.com/031-70335.html
>
> The drawing of the part is at:
>
>
> https://www.amphenolrf.com/downloads/dl/file/id/75/product/2289/031_70335_cu
> stomer_drawing.pdf
> <https://www.amphenolrf.com/downloads/dl/file/id/75/product/2289/031_70335_customer_drawing.pdf>
>
> Sources follow - note some are out of stock.
>
> Here it is at Digikey:
>
>
> https://www.digikey.com/product-detail/en/amphenol-rf-division/031-70335/ARF
> 2142-ND/4037257
> <https://www.digikey.com/product-detail/en/amphenol-rf-division/031-70335/ARF2142-ND/4037257>
>
> Here it is at Mouser:
>
>
> https://www.mouser.com/ProductDetail/Amphenol-RF/031-70335?qs=%2Fha2pyFaduhD
> g7grfPyY2SAIamRqz6fZBRSkrZMjE78%3D
> <https://www.mouser.com/ProductDetail/Amphenol-RF/031-70335?qs=%2Fha2pyFaduhDg7grfPyY2SAIamRqz6fZBRSkrZMjE78%3D>
>
> Here it is at Newark:
>
>
> https://www.newark.com/amphenol-rf/031-70335/mini-bnc-straight-crimp-plug-fo
> r/dp/48AC2302
> <https://www.newark.com/amphenol-rf/031-70335/mini-bnc-straight-crimp-plug-for/dp/48AC2302>
>
> Here it is at Allied Electronics:
>
> https://www.alliedelec.com/product/amphenol-rf/031-70335/71675687/
>
> At online components:
>
> https://www.onlinecomponents.com/amphenol-rf/03170335-50052143.html
>
>
> Good luck!
>
> -----Original Message-----
> From: r-390-bounces at mailman.qth.net <r-390-bounces at mailman.qth.net> On
> Behalf Of Richard Anderson
> Sent: September 1, 2019 7:30 PM
> To: R-390 at mailman.qth.net
> Subject: [R-390] (no subject)
>
> Greetings and good evening
> Looking for part number of the mini BNC connectors inside the R390A. I am
> rebuilding one completely and want to replace all of the coax between
> modules. I have coax and want to build new cables.
>
> Respectfully
> Richard Anderson
> (816) 896-5232 cell
> Sent from my mobile phone
> ______________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-390 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-390 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>