[R-390] IERC Tube Shields - Brand New

[Jacques Fortin]

Exactly.

73, Jacques, VE2JFE

-----Message d'origine-----
De : r-390-bounces at mailman.qth.net <r-390-bounces at mailman.qth.net> De la
part de Barry
Envoyé : 16 septembre 2019 14:35
À : Jacques Fortin <jacques.f at videotron.ca>
Cc : r-390 at mailman.qth.net
Objet : Re: [R-390] IERC Tube Shields - Brand New

So, is the tube not supposed to extend past the top of the shield (as seen
in this ad)?

https://www.ebay.com/itm/153239309529

Thanks,
Barry - N4BUQ

----- Original Message -----
> From: "Jacques Fortin" <jacques.f at videotron.ca>
> To: r-390 at mailman.qth.net
> Sent: Monday, September 16, 2019 12:32:06 PM
> Subject: Re: [R-390] IERC Tube Shields - Brand New
> 
> The IERC TRN6-6015B are not the good size shields for the tubes like 
> the 5814, 12AX7 and etc.
> They were made for the shorter 9 pin tubes like the 5670, 6688, etc.
> The correct IERC part for the 5814, 12AX7, etc. is TRN6-6020B.
> And yes, I am also searching for the TRT5-5020Bs for years.
> 
> 73, Jacques, VE2JFE
> 
> 
> I wish to thank Rich for his posting here.  He has an item I would 
> have bought after my parts post last week.  The only "list" I found in 
> the great information on R-390A.net for tube shields said to use 
> 6020B's, so that's what I was searching for and was glad to find that 
> something else would work.  I STILL need what looks like 13 of the 
> 5020B ones for all these 6BA6's and 6C4's if anyone has a stash of 
> those.  The only one left in the rig I am working on was on the 3TF7!  The
rest were all the shiny shields.
> 
> I still need a couple of the shaft coupler clamps like used on the BFO 
> pitch and Bandwidth shafts to the IF deck and a couple of Oldham 
> coupler anti-backlash springs, or a source for a replacement.  I do 
> think I found an assortment of small springs on Amazon that just might 
> have a couple of those springs in it, so I'll probably order it if I 
> don't come up with anything else.
> 
> I recognize that postage is high, and parts this small aren't really 
> worth a vendor's time to dig out, pack and ship, so likely I won't 
> find what I want and will end up using some old "standard" shaft 
> couplers on my other R-390A needing the clamps.
> Thanks,
> Don
> 
> On 9/16/2019 9:23 AM, Rich Baldwin wrote:
> > If anyone is interested in BRAND NEW IERC tube shields, I have a 
> > large quantity of new, in Military packaging TRN6-6015B units that 
> > are perfect for 5814, 6U8, or 12AX7 size tubes. These are 9 pin 
> > units. I would be happy to make them available in almost any 
> > quantity you might need at
> > $2.00 each.
> >
> > Let me know your location and requirements and perhaps we can do a
deal.
> >
> > Rich Baldwin
> >
> > KD6VK
> >
> > Durham, NC
> 
> ______________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-390 at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
> 
______________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:R-390 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html