[R-390] SE-3 MK IV

[John Gedde]

Easy.  Connect an 8 ohm speaker to the RCA jack on the back of the SE-3.
Now use a BNC to BNC cable to connect the SE-3 to the IF output on the back
of the R390A...

You may need to adjust the gain pot(s) inside the SE-3 but I can walk you
through that after you get it hooked up and playing audio...

John



-----Original Message-----
From: r-390-bounces at mailman.qth.net <r-390-bounces at mailman.qth.net> On
Behalf Of Gary Smith
Sent: Wednesday, October 23, 2019 6:51 PM
To: r-390 at mailman.qth.net
Subject: [R-390] SE-3 MK IV

Does anyone have plans/instructions for hooking up a Sherwood SE-3 MK IV to
an R-390A?

Thanks in advance for your help.

Gary

Gary Smith

AB1GS
______________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:R-390 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html