[R-390] RF Gain Pot Taper

[jgedde at optonline.net]

I hooked my decade box across it and found that putting 1.2k in parallel
gives me better range than the original one.  So, I'm gonna stick with the
linear RF gain pot with the resistor in parallel....

John

-----Original Message-----
From: hamfish at comcast.net <hamfish at comcast.net> 
Sent: Saturday, May 4, 2019 9:32 AM
To: jgedde at optonline.net; 'R390 (E-mail)' <r-390 at mailman.qth.net>
Subject: RE: [R-390] RF Gain Pot Taper

The RF gain pot is a reverse log taper. 

Regards,
Craig

-----Original Message-----
From: r-390-bounces at mailman.qth.net <r-390-bounces at mailman.qth.net> On
Behalf Of jgedde at optonline.net
Sent: Saturday, May 4, 2019 6:28 AM
To: 'R390 (E-mail)' <r-390 at mailman.qth.net>
Subject: [R-390] RF Gain Pot Taper

Morning Folks,

I need to replace my RF Gain pot.  I'm thinking it needs to be a logarithmic
taper pot since the linear one I replaced it with gives me all of the action
between 8 and 10 on the knob.  Can anyone confirm or deny it's a log taper
pot?

Thanks!
John

______________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:R-390 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html