[R-390] J208/P108

[Larry H]

Dave, The wiring should should be the same for all 390As.  Where did you
get the Navships book from?

Regards, Larry

On Sat, Mar 9, 2019 at 1:36 PM dog <agfa at hughes.net> wrote:

> Since I repaired the filament circuit in the RF section from the short,
> now I seem to have lost the HV on V205 pin 6, the calib osc. I can see
> the HV at the switch pin 4 rear of S102 and I can trace it to a pin on
> P108 with the ohmmeter but it doesn't seem to be getting to the plate of
> V205. I'm assuming there's something wrong in J208/P108 or L211 and I'm
> trying to stick with the original stuff, but the pin outs in my Navships
> book looks nothing like the J208/P108 pin layout in my radios (both of
> them and they look the same). Were there different P and J items for
> those? I guess I'm going to have to pull out the RF section again to see
> what's going on with that, I already have the other radio nearly
> completely apart so I can compare. I know I didn't get the J208 back in
> the same orientation as originally, but that shouldn't make any diff
> since it looks like it can only plug in one way, and the filaments work
> as well as the RF section. I'm just curious, I'm sure I'll find the
> issue one way or the other, it's either a miswire or bad component.
> Luckily nothing is smoking, yet.
>
> Dave N3DT
>
> ______________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-390 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>