[R-390] R-390 : L903 in the Calibrator Module

[jgedde at optonline.net]

I put the 0.5 mH in mine... 

-----Original Message-----
From: r-390-bounces at mailman.qth.net <r-390-bounces at mailman.qth.net> On
Behalf Of Jacques Fortin
Sent: Wednesday, June 12, 2019 8:55 PM
To: r-390 at mailman.qth.net
Subject: [R-390] R-390 : L903 in the Calibrator Module

Hi all,

The calibrator module of my R-390 never had any "MOD" applied so L903 was
never assembled in.
Not that it was not working the last time I used it, but...
I am not sure about the L903 value: the MOD list on page 4 of the
TM11-5820-357-35 indicates 0.5mH (500µH) but the schematic itself indicates
0.5µH (500nH).
Which value is the right one ???
BTW, L903 is not listed in the TM11-5820-357-35-P (the parts list).....

73, Jacques, VE2JFE

______________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:R-390 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html