[R-390] Cosmos PTO Linearity

[Steve Hobensack]

I have a Cosmos that was once out of endpoint adjustment. I found one of  the endpoint coils was shorted out. It seems one of the copper wire leads to that coil was in contact with a grounded screw and the varnish finally wore off. Check for that.


On another note, I have found different screw heads on the teflon screw disk linearity adjustment, allen square or maybe it was britol square, phillips, & sloted. I made an adjustment tool using a small steel wire and a dremmel wheel (with the aid of a magnifing lamp and jewelers loupe).

Steve N8YE