[R-390] Need suggestions/assistance powering up an R392

[FISCH, MICHAEL]

William Perry company in Ky used to have the connectors at a reasonable price.  He is a great person.  Basically you need to connect the filaments and B+ to 28 V and ground to ground.  The pins are in the manual.  The correct size thin wall brass tubing can get you started.  More than you will need is available on BAMA and the R-390 pearls, etc.


It is a fun receiver.

Mke


Michael Fisch
College of Technology
Kent State University
330 6729388 (V)
________________________________
From: r-390-bounces at mailman.qth.net <r-390-bounces at mailman.qth.net> on behalf of Doug Hensley <w5jv at hotmail.com>
Sent: Monday, August 27, 2018 6:46:18 PM
To: boatanchors mailman.qth.net; MilSurplus QSLNet; r-390 at mailman.qth.net
Subject: [R-390] Need suggestions/assistance powering up an R392

If you've had or still run an R-392, I could use your input.  I need suggestions on how to power one up, where to find the power connector without paying as much for it as I paid for the radio, and what, if any, critical checks did you make.


Thanks in advance for any assistance,


Doug W5JV







______________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:R-390 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html