[R-390] R-390 "non A" cap replacement list/order?

[Lester Veenstra]

Still not as good as removing regulator tubes and feeding in place from an
external regulated supply

Lester B Veenstra  MØYCM K1YCM W8YCM
lester at veenstras.com

Physical and US Postal Addresses
5 Shrine Club Drive (Physical)
452 Stable Ln (RFD USPS Mail)
Keyser WV 26726
GPS: 39.336826 N  78.982287 W (Google)
GPS: 39.33682 N  78.9823741 W (GPSDO)


Telephones:
Home:                     +1-304-289-6057
US cell                    +1-304-790-9192 
UK cell                    +44-(0)7849-248-749 
Guam Cell:              +1-671-929-8141
Jamaica:                 +1-876-456-8898 
 
This e-mail and any documents attached hereto contain confidential or
privileged information. The information is intended to be for use only by
the individual or entity to whom they are addressed. If you are not the
intended recipient or the person responsible for delivering the e-mail to
the intended recipient, be aware that any disclosure, copying, distribution
or use of the contents of this e-mail or any documents attached hereto is
prohibited.

-----Original Message-----
From: Roy Morgan [mailto:k1lky68 at gmail.com] 
Sent: Sunday, May 29, 2016 11:26 PM
To: Lester Veenstra
Cc: Jacques Fortin; Jason White; r-390 at mailman.qth.net
Subject: Re: [R-390] R-390 "non A" cap replacement list/order?


On May 27, 2016, at 9:14 AM, Lester Veenstra <m0ycm at veenstras.com> wrote:

> There is a good solid state replacement for the 6082 out there somewhere.
>From Canada as I recall. 
...
> From: Jacques Fortin [mailto:jacques.f at videotron.ca] ...
> I recommend also that you begin searching for the 6082 regulator tubes if
you don't have spares already.

My very strong recommendation is to put a fan against the chassis to cool
the 6082 tubes (and replace the cathode balancing resistors at their
sockets).

I’ll send to Jacques and any others interested the picture of my lashed up
fan plate that holds a fan in the right place.



Roy

Roy Morgan
k1lky68 at gmail.com
K1LKY Since 1958