[R-390] Need panel painting advice

Steve Toth via R-390 r-390 at mailman.qth.net
Thu Mar 12 10:40:01 EDT 2015


"Titanium White" water based acrylic paint stick (available at art supply stores and college campus bookstores in the art supply section) works very nicely - have used it on knobs too! - Steve
"Always look for a positive solution then Improvise, Adapt, and Overcome"
A veteran - whether active duty, retired, National Guard or Reserve - is someone who, at one point in his or her life, wrote a blankcheck made payable to "The United States of America" for an amount of "up to and including my life."

      From: djed1--- via R-390 <r-390 at mailman.qth.net>
 To: pmills7 at comcast.net; r-390 at mailman.qth.net 
 Sent: Wednesday, March 11, 2015 4:22 PM
 Subject: Re: [R-390] Need panel painting advice
   
I haven't done my R-390A, but have done a couple of Hammarlund Super Pros.  Stripping the front panel will naturally soften the paint in the engraving.  I used a brass brush on a Dremel to completely remove the paint in the engravings.  To be a little more obssesive-compulsive, after each layer of front panel paint I used a dental pick and magnifying glass to clean the paint out of the engraving.  Otherwise you need to spray very thin layers so you don't fill the engravings.  When all my paint was dried, I filled the engravings with a white paint stick.  I used the edge of a piece of thin plastic to level the paint, then let it dry. Finally, I cleaned any residue with a Q-tip and a little solvent.  Looks great.
And yes, I was off the list last night because I was having a dinner of Kielbasa..

Ed  W2EMN


 

 

 

-----Original Message-----
From: Phil <pmills7 at comcast.net>
To: R-390 <r-390 at mailman.qth.net>
Sent: Wed, Mar 11, 2015 4:21 pm
Subject: [R-390] Need panel painting advice


I've decided to repaint the engraved panel of my R-390A.
It appears that the
engraving is pretty well filled up by the
white lettering paint.  I'm thinking
I need to use paint stripper
to clean this up as well as the rest of the front
of the panel.

Any suggestions or advice?

thanks,
Phil


______________________________________________________________
R-390
mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help:
http://mailman.qth.net/mmfaq.htm
Post: mailto:R-390 at mailman.qth.net

This
list hosted by: http://www.qsl.net
Please help support this email list:
http://www.qsl.net/donate.html



 
______________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:R-390 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


  


More information about the R-390 mailing list