[R-390] multiple receiver coupler

[billriches]

Try

http://www.stridsberg.com/prod01.htm

Have used them and they work fine.

73,

Bill, WA2DVU

-----Original Message-----
From: R-390 [mailto:r-390-bounces at mailman.qth.net] On Behalf Of Mike
McCauley
Sent: Sunday, January 18, 2015 8:46 PM
To: R-390 at mailman.qth.net
Subject: [R-390] multiple receiver coupler


As I recall, this topic has been addressed here before, but evidently I did
not save those threads.

I'm interested in buying/building a 1 in >=4 out receiver coupler, HF only,
receive only, >=0dB gain per port relative to the incoming antenna signal.

I'd greatly prefer broadband, but I could live with tunable if that's the
only practical way to go.

As I recall (???), such units have existed in the mil surplus market, but
they are very rare today.

I'd be happy to build something, either tube or solid state, if anyone has a
know-good design.

Any and all advise will be welcomed.

Thanks in advance for the help!

Mike, WB5MYY



PS - If you get a dupe post on this, my apologies, I had an email client
glitch.
______________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:R-390 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com