[R-390] Was - AGC voltage issue - Now - Original cap kit by Birmingham Dave.

[Barry Williams]

I was listing the few caps added to the base package for doing your own.


the other Barry



On 9/17/14 4:21 PM, Bill Guyger wrote:
> Hayseed Hamfest has reproductions of the multi section Electrolytics 
> in stock.
>
> Bill AD5OL
>
>
> On Wednesday, September 17, 2014 3:18 PM, Barry Williams 
> <ba.williams at charter.net> wrote:
>
>
> I think it was recently said that Dave has passed. It was always good to
> have him around. He bought the parts at a discount through his job at
> one of the clinics/hospitals at UAB. His supervisors were nice enough to
> let him add radio needs to job orders.
>
> I have one of his packages that include the caps for doing the large
> cans. I can't remember what I paid way back then, but it was probably
> bumping $90. I would like to sell mine to anyone who wants the whole
> package. It has all of the caps and the info sheets, and parts inventory
> sheet.
>
> Contact me off list.
>
>
> the other Barry
>
>
>
> On 9/17/14 1:30 PM, rbethman wrote:
> > List,
> >
> > Going back to November 2007, <DAVEINBHAM at aol.com 
> <mailto:DAVEINBHAM at aol.com>>, was putting
> > together re-cap kits for the R-390As.
> >
> >
> > The kit consisted of:
> >
> > R-390A  capacitor kit
> > I have put together a ReCap kit for the R-390A.
> > It consists  of:
> >
> > (13) 0.1  ufd, 600 V
> > C256, C309, C504, C505, C517,  C521, C528, C531, C536, C538, C543,
> > C547, C548
> >
> > (7) 0.033 ufd,  600V
> > C275, C529, C533, C534, C541, C545, C602
> >
> > (7) 0.01 ufd,  600V
> > C549, C553, C601, C604, C605, C607, C608
> >
> > (3) 30 ufd, 300V  electrolytic C603A, C603B, C603C
> > (2) 47 ufd, 300V electrolytic C606A,  C606B
> > ( The above electrolytics have  axial leads. You can wire them under the
> > chassis and leave the originals in place to retain stock appearance.
> > Or you
> > can order capacitors small enough to fit inside the cans of C603 &
> > C606. Just
> > remember you will have to deal with the Dreaded Black Ukkumpucky to
> > get the
> > guts out of the cans C603 & C606. If you do not specify at the  time
> > of your
> > order, the under the chassis capacitors will be shipped.)
> >
> > Finally,one each of:
> > 0.047 ufd. 100 V C227
> > 8 ufd 30  V tantalum electrolytic C609
> > 50 ufd 50 V electrolytic C103
> > 0.22 ufd 100V  C101
> >
> > I cannot find a source for:
> > 2 ufd 500 V C551 oil filled  paper
> >
> > so, I will I will include a very high quality poly cap. I  have
> > installed one
> > of these in one of my R-390A's
> >
> > ********************************************
> >
> > This was a very large black poly cap rated at 500V.
> >
> > I procured two of these kits from Dave, no longer with us, and
> > wouldn't remotely recommend *anything* less than a 500V Poly Cap for
> > C-551
> >
> > Bob - N0DGN
> >
> >
> > ______________________________________________________________
> > R-390 mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/r-390
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:R-390 at mailman.qth.net <mailto:R-390 at mailman.qth.net>
> >
> > This list hosted by: http://www.qsl.net/
> > Please help support this email list: http://www.qsl.net/donate.html
>
>
> ______________________________________________________________
> R-390 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/r-390
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:R-390 at mailman.qth.net <mailto:R-390 at mailman.qth.net>
>
> This list hosted by: http://www.qsl.net/
> Please help support this email list: http://www.qsl.net/donate.html
>
>