[R-390] How are your knobs ?

[quartz55]

Got the bit today. Just hand drilled it with the Milwaukee.  Had to cut 
off some of the bushing, expected, but of course I cut off .1" too much, 
but I'm going to try it anyhow.  Cut it off by chucking the bushing in 
the drill and using a hacksaw while drilling, pretty easy. Then I used 
the good end to cut the slots with the same hacksaw.  Pretty quick.  I 
cleaned everything with brake cleaner (so there won't be a long thread 
about acetone), dried it with the heat gun and made up the glue, so I'll 
give it 2 days to cure.  I put the clamp on so it wouldn't fall down in 
too much.

http://i251.photobucket.com/albums/gg287/DogTi/R390A/bushing_zps532eb123.jpg

http://i251.photobucket.com/albums/gg287/DogTi/R390A/knobglued_zps35c9bfdb.jpg

Dave