[R-390] The Tool that clips on the back of the R388/URR

[Chris Farley via R-390]

That tool is a 3/16" L shaped driver, with a #1 Phillips bit on each end.  I have an original, and devoted a fair bit of time tracking that bugger down through Collins paperwork, NSN numbers, and discontinued part numbers.  In a nutshell, it is no longer available.  I even looked into having them custom made, but never came across a shop that was able/willing to do them.  


If you have any leads and don't care to go through the hassle and expense yourself, let me know.  


Good look in either event-

Regards,
Chris kc9ieq



________________________________
 From: Transmaster <22hornet at gmail.com>
To: R-390 <R-390 at mailman.qth.net> 
Sent: Wednesday, June 25, 2014 10:17 AM
Subject: [R-390] The Tool that clips on the back of the R388/URR
 

Now that I have the tool set for the R390A clipped home, thanks Chris,  I
was wondering about the  "L" shaped tool the fits on the back of the
R388/URR.  The pictures in the Tech manual are not very clear but it looks
like a straight slotted screw driver on the long side and a Philips on the
"L" side. I have the complete set of alignment tools clipped inside I am
only missing the "L" driver tool. on the back does any one know where I
might find one.

Ken de W7ITC

Kenneth A. Crips, W7ITC, NRA Life member. Home of the Chew Crew,  Red
Headed Irish Terrier House Ninjas, Cowboy, and Ladybug  10th degree black
belts in Mouch Fue, Bed Fue, and Con Artist Fue.
______________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:R-390 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html