[R-390] Chris Farley EXCELLENT R390A Replica Tool Kit

[Chris Farley via R-390]

OK gang the remainder from this batch has been spoken for-  I will (hopefully) have some more in about a month.

Regards, 
Chris




________________________________
 From: Chris Farley via R-390 <r-390 at mailman.qth.net>
To: "r-390 at mailman.qth.net" <r-390 at mailman.qth.net> 
Sent: Thursday, April 24, 2014 3:15 PM
Subject: Re: [R-390] Chris Farley EXCELLENT R390A Replica Tool Kit
 

I have four more reproduction R-390A tools sets available at a 10% discount to list members if anyone is interested.  $35 including CONUS shipping.  

Pictures may be seen here:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=331162687400

If you would like a set, send me an email and I will confirm with payment instructions.  


Regards, 

Chris Farley kc9ieq



________________________________
From: Glenn Scott <wa4aos at aol.com>
To: r-390 at mailman.qth.net 
Sent: Tuesday, April 1, 2014 10:17 AM
Subject: [R-390] Chris Farley EXCELLENT R390A Replica Tool Kit


Hi Group,

I just received 2 sets of Rear Panel Tools for the R390A provided by Chris Farley. The tools are very high quality and shipping was fast.
Chris had the right angle bristol wrench faithfully replicated by a shop that knows what they are doing. The fit and finish as well as the functionality of both tools is TOP SHELF. The Bristol tool rod has a nice stainless steel shaft. Where the Bristol wrench fits the tool shaft, it is pressed in and crimped with a small crimp to keep the blade very stable.

The #1 screwdriver is off the shelf but  better, "IMHO,"  than the original due to the hardened tip. The handle is slightly wider than the original I have but I consider this to be a very reasonable replica of the original.

A set on the rear of your 390A is a very nice touch even if you only want them to make your unit complete. However, these tools are ready and capable to go to work on your work bench as well.

I will now include a set on all of my restorations as icing on the cake for my clients; nice touch! Perhaps other 390A restorers will take advantage of supplying these to their clients while they are being re-manufactured. .

Nice job Chris!!! You get FIVE STARS in my book * * * * * !!  

Now if someone will take on having QUALITY replacement meters made!! Hint hint!!

73,
Glenn WA4AOS
DSM Labs (dot com)
______________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:R-390 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:R-390 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html