[R-390] Zero adjust on R-390 receiver

[rbethman]

I don't know if epoxy would do it.

There *may* be a method of "staking" it to the shaft with a pin punch.

Don't know as I haven't tried it.

Right now mine is apart for restoration.

The clutch has to dis-engage from the geartrain er make that the PTO. To 
allow the shift without moving the Veeder Root counter.

Bob - N0DGN

On 3/16/2013 4:01 PM, Bob Camp wrote:
> Hi
>
> Loose clutch plate fix:
>
> Beg .. borrow … steal one from another radio.
>
> Might try a good clean and some epoxy.  I've never tried it, no idea if it could be made to work.
>
> Bob
>
>
>
> On Mar 16, 2013, at 3:55 PM, rbethman <rbethman at comcast.net> wrote:
>
>> Take a look at the clutch plate.
>>
>> *IF* the plate has come loose and rotates, then it won't work right.
>>
>> It is a press fit.
>>
>> If it has come un-done, I don't know what you can do to get it back to working.
>>
>> Bob - N0DGN
>>
>>