[R-390] Filter Repair

[quartz55]

Ugh, I had it, the wires on this coil were both broken short to the coil, but I managed to solder 2 #40 wires on the short ends, and I measured 52 ohms and then moving things around the one that goes down inside the coil snaped off right at the notch it comes out of.  I tried digging it out, but of course all that did was break it off even shorter.  So it looks like I'm going to get a lesson in coil winding, unless I can find one out of the other ones that are junk.  The top wire was broken at the notch too, but I managed to pull it up, solder a wire on it and glue it back in the notch, so it worked, but......

http://i251.photobucket.com/albums/gg287/DogTi/R390A/coilbrokenwire_zps7a702c9c.jpg