[R-390] R-390A PTO ground strap screw

[Barry]

Actually, the local store here will sell just about any quantity to me if it's in stock.  If they don't stock it, then they may have a minimum on very small screws, etc., but typically it's a very reasonable quantity (not like a $25 minimum or anything like that).  I've started using them more as the store is right on my way to work and, like you say, they have just about any kind of fastener.

Watch out which kind of stainless fasteners you order, though.  One grade is vastly more expensive than the other.

Barry - N4BUQ


 On Wed 18/07/12  5:39 PM , "KR4HV" kr4hv at numail.org sent:
> Hi Bob.  When you find out exactly what type screw it is you may want to
> tryFastenal(www.fastenal.com/)
> .  I am not connected with them, just a customer.They are an industrial supplier and can get just about any screw & bolt
> madewith any thread count, US, course or fine and metric) .  They don't cater
> tothe individual trade but will sell to us. Most of their locations (check
> thecomputer, they are all over the US) stock down to 4-40 or 6-32 in
> stainless,cadmium and brass but I have just gotten some 3-48s, 2-56s, 0-80s & M3s
> indifferent lengths in stainless from them (they ordered them for me and
> ittook all of 3 days delivered to their store). 
> 
> I particularly like the stainless nuts with captive star washers in
> 4-40,6-32 & 8-32, etc.  Work great in tight places. They sell them in bags of
> 50or 100 in these sizes.. 
> 
> You may have to order 25 or 50 of a part number as they typically don't
> sellby "each".  They are much more affordable than the hardware or
> builder'smart.
> 
> 73, Walt
> KR4HV