[R-390] U VFO Band Spread Test

[Flowertime01 at wmconnect.com]

U VFO Band Spread Test
___ 01 Set the Line Meter OFF
___ 02 Set the Line gain to 0
___ 03 Set the ANT Trim to 0
___ 04 Set the AGC to MED
___ 05 Set the LIMITER to OFF
___ 06 Set the Band Width to 2KHz
___ 07 Set the BFO Pitch to 0
___ 08 Set the Audio Response to wide
___ 09 Set the Breakin to OFF
___ 10 Set the Function to CAL
___ 11 Set the BFO to ON
___ 12 Set the Zero Adjust to center
___ 13 Release the Dial Lock
___ 14 Set the Local Audio to max
___ 15 Set the RF to max
___ 16 Set the KHz knob to -000
___ 17 Adjust the BFO Pitch to zero beat
___ 18 Set the KHz knob to +000
___ 19 Rock the KHz knob to zero beat
___ 20 The VFO band spread should be less than 300 Hertz
</HTML>