[R-390] Drawing and parts list

[Randy and Sherry Guttery]

On 1/12/2011 9:17 AM, Paul Galpin wrote:
> Hi All!
>
> I am in the middle of re-building my Amelco gearbox. Wanting to be sure of where bits go, I printed out the "Zoning for RF Gear
> Train Assembly Fig 6-36" list, and Fig 6-36 itself.
>
> Nothing seems to make sense!
>
Yes, we're aware of that.   I'm in the process (along with 
Perry Sandeen) of "redoing" those drawings, parts lists, 
etc. - though several minor "disasters" have interrupted my 
efforts for a time.  To help you out right away - I'll post 
what I have currently - though be advised - we're still 
adding details (bushing thickness specs and such) - and of 
course I'm sure one or two "oops" have slipped into my work 
as well.

Here is the "revised" figure 6-36:

<http://comcents.com/geartrain%20print.jpg>

And here is the parts list to go with it:

<http://comcents.com/Gear_Train_Index_Chart.pdf>

Again - these are preliminary - and subject to revision.  
Eventually - I'll get the last of the additional 
illustrations and photos done (such as the clutch mech. 
breakdown and assembly, etc.) and they'll be added to the 
Y2K manual.

Best regards...

-- 
randy guttery

A Tender Tale - a page dedicated to those Ships and Crews
so vital to the United States Silent Service:
http://tendertale.com