[R-390] Question about the Y2K manual... (or how Randy can be dumb as a rock)...

[Glenn Little WB4UIV]

I noted the same thing.
It looks like the exploded view is from one manual and the call out 
is from another.
This may have been a problem with the original documentation.

73
Glenn
WB4UIV

At 01:39 PM 9/19/2010, Randy and Sherry Guttery wrote:
>   I'm confused (nothing new)...  so please someone set me in
>the right direction and give me a swift kick.  I'm putting
>my gear train back together (I'll post about some VERY big
>"surprises there another time"...   and using the Y2K
>manual.  On pages 191 - 195 is the zoning chart for the
>exploded gear train shown in 6-36.  Great. should make
>getting the shims, spacer bushings, etc. in the right
>place(s) much easier. Uh-huh.  I start trying to use the
>chart  - and find that what seemed obvious a short time ago
>- now has me totally confused.  I look at the diagram -
>there is a gear set with "call out" (index?) 41.  I look at
>the chart - Index 41 = 1/4 inch retaining ring.  Two shims
>and bushing on the shaft of 41 marked 42 & 43 - but the
>chart lists them as No. 8 riveted gear and 4-40 square nut.
>
>What am I obviously overlooking????
>
>rg - making dumb and dumber looking smart and smarter by the
>day...
>
>--
>
>A Tender Tale - a page dedicated to those Ships and Crews
>so vital to the United States Silent Service:
>http://tendertale.com
>
>______________________________________________________________
>R-390 mailing list
>Home: http://mailman.qth.net/mailman/listinfo/r-390
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:R-390 at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html